{"title":"Genuine - Performance - Carb \u0026 Intake","description":"","products":[{"product_id":"carburetor-si-24-24e-injector-vespa-p200e-rally-200-px200-183104","title":"CARBURETOR SI 24\/24E INJECTOR VESPA P200E\/RALLY 200\/PX200","description":"\u003cp\u003e\u003cstrong\u003e24MM Oil-Injected replacement Carburetor for Rally, P200, and Most Large Frame Vespas.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eDon't mess around with a rebuild on a carburetor that's 30 years or older. Replace the entire carburetor with a new one while you still can. The SI24\/24-E carburetor was first installed as standard equipment on the Rally 200. It was later installed on the P\/PX\/PXE 200. There was a short period of time when P200E models imported to the U.S. in 1980\/1981 came with a 20\/20 for leaner emissions purposes. Aside from this exception, all 200cc Vespas are intended to be run with this size carburetor with the included jetting. This carburetor is also the preferred size for anyone looking to replace and upgrade a 20\/17 or 20\/20 carburetor. The larger 24mm carburetor will fit in the 17 or 20mm air box. Slight modifications to the airbox will be required to maximize carburation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis comes with the following jetting (these have changed from time to time, so this is not guaranteed):\u003c\/strong\u003e\u003cbr\u003e-Idle Jet: 55\/160\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMain Jet Stack:\u003c\/strong\u003e\u003cbr\u003e-Air Jet: 160\u003cbr\u003e-Mixer Tube: BE3\u003cbr\u003e-Main Jet: 116\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended upgrades\u003c\/strong\u003e are to replace the included slide that have the air pockets that lean the mixture off idle with the \u003ca href=\"https:\/\/www.scooterwest.com\/throttle-slide-24-24-vsx1t-183141.html\" target=\"_blank\" rel=\"noopener\"\u003e183140-4.0\u003c\/a\u003e slide and install the \u003ca href=\"https:\/\/www.scooterwest.com\/air-fuel-mixture-screw-px-modified-to-fit-p-air-box-239089-mod.html\" target=\"_blank\" rel=\"noopener\"\u003e239089-MOD\u003c\/a\u003e air fuel mixture screw that is similar size to the original mixture screw found on the non-electric start Vespa scooters. \u003c\/p\u003e\n\u003cp\u003eIf you're going to run no oil injection and do not have the oil pump present in your air box, the \u003cstrong\u003e\u003ca href=\"https:\/\/www.scooterwest.com\/pull-rod-for-si-carb-slide-non-injected-with-loop-for-hooking-directly-to-cable.html\" target=\"_blank\" rel=\"noopener\"\u003e085307\u003c\/a\u003e \u003c\/strong\u003epull rod can be installed to fit this carburetor in your non-oil injection setup.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOriginal Dellorto Carburetor, made by Spaco. The Carburetor is the backbone of your motor. Give it new life, give it a NEW carburetor. Your scooter will thank you with: quicker starting, enhanced performance, and better all-around reliability. A great deal at any price. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSee Reference Number \u003ca href=\"https:\/\/www.scooterwest.com\/performance-carburetor-26-26e-injector-18310426.html\" target=\"_blank\" rel=\"noopener\"\u003e18310426\u003c\/a\u003e for the 26mm performance upgrade carburetor.\u003c\/p\u003e","brand":"Scooterwest","offers":[{"title":"Default Title","offer_id":52435339870497,"sku":"183104","price":159.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/4817\/1809\/files\/183104-carburetor-si-2424e-injector-vespa-p200erally-200px200_13.jpg?v=1781816722"},{"product_id":"performance-carburetor-26-26e-injector-18310426","title":"Performance Carburetor 26\/26E Injector","description":"\u003cp\u003e\u003cstrong\u003eSpecially Produced 26mm Oil-Injected Carburetor for Rally, P200, and Most Large Frame Vespas.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThese 26mm carburetors were developed as an over-sized version of the stock carburetor. They are classified as 26mm carburetors but the Carburetor venturi actually measures more like 25.7mm. This carburetor is a direct replacement for the SI-24\/24E. They allow for more atomized fuel\/air to enter the crankcase. It's easy to install, no modifications to the carburetor or air box are required for installation. \u003cbr\u003e\u003cbr\u003eThis comes with the following jetting:\u003cbr\u003e-Idle Jet: 55\/160\u003cbr\u003e\u003cbr\u003eMain Jet Stack:\u003cbr\u003e-Air Jet: 160\u003cbr\u003e-Mixer Tube: BE3\u003cbr\u003e-Main Jet: 120\u003cbr\u003e\u003cbr\u003eOriginal Dellorto Carburetor, made by Spaco. The Carburetor is the backbone of your motor, give it new life, give it a NEW carburetor. Your scooter will thank you with quicker starting, enhanced performance, and better all around reliability. A great deal at any price. \u003c\/p\u003e","brand":"Scooterwest","offers":[{"title":"Default Title","offer_id":52435340132641,"sku":"18310426","price":198.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/4817\/1809\/files\/18310426.jpg?v=1781817055"},{"product_id":"t-5-style-air-filter-235363","title":"T-5 Style Air Filter (2353635)","description":"\u003cp\u003e\u003cstrong\u003eAir Filter for SI-24\/24G style of carburetor-T5.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Vespa T5 came with a special series of carburetor. The \"G\" series carburetor has a shorter venturi and a special taller air filter. The increased surface area of the air filter improves air flow and performance.\u003cbr\u003e\u003cbr\u003eThis air filter had been discontinued by Piaggio and was unavailable for several years. It's recently been re-made by a German company. Good news: It's available again. Bad news: It's expensive. \u003cbr\u003e\u003cbr\u003eThis air filter is ideally fitted with the SI-24\/24G carburetor. It can also be fitted to a SI-20\/20 or SI-24\/24E carburetor but you'll need to change the air filter screws, air box lid, and air box lid securing screws.                   \u003c\/p\u003e","brand":"Scooterwest","offers":[{"title":"Default Title","offer_id":52435343245601,"sku":"235363","price":67.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/4817\/1809\/files\/235363-t5-style-air-filter_13.jpg?v=1781817223"},{"product_id":"px-stella-t5-24-24g-performance-carb-235753","title":"VESPA T5 STYLE SI24\/24G DELLORTO PERFORMANCE CARBURETOR WILL ALSO FIT STELLA PX AND P SERIES","description":"\u003cp\u003e\u003cstrong\u003eVESPA T5 STYLE SI24\/24G DELLORTO PERFORMANCE CARBURETOR (WILL ALSO FIT THE STELLA PX AND P SERIES)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: YOU WILL NEED THE T5 AIR FILTER, AIR BOX LID, AND HARDWARE TO USE THIS CARB. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOIL-INJECTED SI 24\/24-G Carburetor for Large Frame Vintage Vespa, made by Spaco.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis is commonly referred to as the \"T-5 style carburetor\" in the vintage Vespa scene. The G series carburetor was specifically engineered by Del'Orto for the Vespa T5. This carburetor is characterized by the shorter venturi and larger air filter. This results in an accelerated flow rate of atomized fuel and air into the combustion chamber. Putting it simply, this is the best performing \"stock\" carburetor you can install on a large frame Vespa. Remember that the shorter venturi means that this carburetor uses a larger air filter and the shorter Air-Corrector and Idle Jets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis performance carburetor comes jetted for a stock PX150 or Stella, you will need a larger main jet (120 or higher) for a P200E.\u003c\/strong\u003e\u003cbr\u003e--BE4 Atomizer\u003cbr\u003e--110 Main Jet\u003cbr\u003e--120 Air Jet\u003cbr\u003e--50\/100 Idle Jet\u003cbr\u003e\u003cbr\u003eThe air filter, air box lid, and installation hardware are unique to this series of carburetor and will not be the same as the SI 24\/24-E carburetor commonly found on a stock U.S. spec P200. We offer a \u003ca href=\"https:\/\/www.scooterwest.com\/px-stella-t5-24-24g-performance-carb-kit.html\" target=\"_blank\" rel=\"noopener\"\u003eCOMPLETE KIT\u003c\/a\u003e of components to replace your E-Series of carburetor with the G-Series of SI carb. \u003c\/p\u003e","brand":"Vintage Vespa Item","offers":[{"title":"Default Title","offer_id":52435355664673,"sku":"235753","price":159.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/4817\/1809\/files\/235753-pxstella-t5-2424g-performance-carb_13.jpg?v=1781817088"},{"product_id":"malossi-30mm-carb-kit-w-rotary-manifold-m1610701","title":"Malossi 30mm Carb Kit w\/Rotary Manifold","description":"\u003cp\u003eMalossi complete 30mm carb kit with Dellorto PHBH, Rotary manifold, rubber boot, air bellow, gasket and cables. Fits most Large frame scooters 1960's \u0026amp; Later.. but does NOT fit on Stella scooters.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eScooter West has been a proud distributor of Malossi products since 1995. We \u003cbr\u003ekeep more Malossi part numbers in stock than any other company in North America. \u003cbr\u003eWhen it comes to quality performance scooter parts, MALOSSI is the long-standing \u003cbr\u003eindustry leader for price, selection, and quality. All Malossi components are \u003cbr\u003emade 100% in Italy. All final manufacturing, assembly, and research and \u003cbr\u003edevelopment is done at their impressive facility in Bologna, Italy. Literally, \u003cbr\u003ejust down the street from Ducati and a 20 minute drive from Ferrari. The quality \u003cbr\u003eof Malossi components is commonly far superior to comparable original equipment \u003cbr\u003ecomponents. They are after-all, designed and race-track tested and approved.\u003cbr\u003e\u003cbr\u003eLike many other Italian aftermarket companies, Malossi has humble beginnings as \u003cbr\u003ea small family business sprung from one man's passion. Mr. Ugo Malossi started \u003cbr\u003etuning and manufacturing the best performance carburetors in the region under \u003cbr\u003ethe tutelage of his mechanically accomplished father, Armando. In 1957, with the \u003cbr\u003evision of Ugo, Malossi was formally born. Ugo's son and daughter are the active \u003cbr\u003emanagers of the company and they share in their father's passion and vision to \u003cbr\u003e“Always improve.”\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003e**Disclaimer** No Refunds, Exchanges, or Returns on performance items. \u003cbr\u003eCertain performance items may void your factory warranty. Additionally, some \u003cbr\u003eperformance items may not be suitable for on-road use. Scooter West is not \u003cbr\u003eresponsible for any damages caused by the correct or incorrect installation \u003cbr\u003eand\/or misuse of any performance products. With all this standard legal jargon \u003cbr\u003ebeing said, we wouldn't sell anything that we wouldn't install on our own \u003cbr\u003escooters. We are blessed to have a Robot running our service department that \u003cbr\u003emakes sure everything is installed correctly on our personal scooters ;).\u003c\/em\u003e\u003c\/strong\u003e \u003c\/p\u003e","brand":"Scooterwest","offers":[{"title":"Default Title","offer_id":52435358810401,"sku":"M1610701","price":379.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/4817\/1809\/files\/m1610701-malossi-30mm-carb-kit-vespa.jpg?v=1781816973"},{"product_id":"dell-orto-needle-for-phbg-w-type-needle-need-w","title":"DellOrto Needle for PHBG W Type Needle","description":"\u003cp\u003e\u003cstrong\u003eDell'Orto W Type Needle Fits PHBG Carburetor \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePartial load or half gas can be reached when the gas slide valve is 1\/4 to 3\/4 open. Jet needles and mix tube are responsible for regulating the gas in this range. Needles The needle can be adjusted with a clip in 4 different positions. If the motor runs fine with the throttle completely wide open, but stutters at half, then it's running too rich. You can hang the jet needle lower (move the clip higher up the needle) and so reduce the mix in this range. If the needle is already at it's lowest position and the mix is still too rich, then use either a thicker needle or a smaller mix tube. If your performance is too low at full gas then hang the needle higher. Needles come in a variety of thicknesses, lengths and grades. We recommend trying out several needle sizes to find which one is best for your personal tuning needs.\u003c\/p\u003e","brand":"Scooterwest","offers":[{"title":"W4","offer_id":52435410518305,"sku":"NEED-W4","price":14.95,"currency_code":"USD","in_stock":false},{"title":"W6","offer_id":52435410551073,"sku":"NEED-W6","price":14.95,"currency_code":"USD","in_stock":true},{"title":"W7","offer_id":52435410583841,"sku":"NEED-W7","price":14.95,"currency_code":"USD","in_stock":true},{"title":"W8","offer_id":52435410616609,"sku":"NEED-W8","price":14.95,"currency_code":"USD","in_stock":false},{"title":"W18","offer_id":52435410649377,"sku":"NEED-W18","price":9.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/4817\/1809\/files\/need-w-dellorto-needle-for-phbgw-type-needle_10.jpg?v=1781816789"},{"product_id":"dell-orto-carb-needle-phbh-x-type-needle-need-x","title":"Dell'Orto Carb Needle PHBH-X Type Needle","description":"\u003cp\u003e\u003cstrong\u003eX Type needle for Dell'Orto PHBH \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarburetors Partial load or half gas can be reached when the gas slide valve is 1\/4 to 3\/4 open. Jet needles and mix tube are responsible for regulating the gas in this range. Needles The needle can be adjusted with a clip in 4 different positions. If the motor runs fine with the throttle completely wide open, but stutters at half, then it's running too rich. You can hang the jet needle lower (move the clip higher up the needle) and so reduce the mix in this range. If the needle is already at it's lowest position and the mix is still too rich, then use either a thicker needle or a smaller mix tube. If your performance is too low at full gas then hang the needle higher. Needles come in a variety of thicknesses, lengths and grades. We recommend trying out several needle sizes to find which one is best for your personal tuning needs.\u003c\/p\u003e","brand":"Scooterwest","offers":[{"title":"X1","offer_id":52435450560801,"sku":"NEED-X1","price":14.95,"currency_code":"USD","in_stock":true},{"title":"X2","offer_id":52435450593569,"sku":"NEED-X2","price":14.95,"currency_code":"USD","in_stock":true},{"title":"X3","offer_id":52435450626337,"sku":"NEED-X3","price":14.95,"currency_code":"USD","in_stock":false},{"title":"X8","offer_id":52435450659105,"sku":"NEED-X7","price":14.95,"currency_code":"USD","in_stock":true},{"title":"X9","offer_id":52435450691873,"sku":"NEED-X15","price":14.95,"currency_code":"USD","in_stock":true},{"title":"X11","offer_id":52435450724641,"sku":"NEED-X11","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/4817\/1809\/files\/need-x-dellorto-carb-needle-phbhx-type-needle_10.jpg?v=1781816789"},{"product_id":"dell-orto-needle-for-phbe-phf-phm-phsb-vhsb-k-type-need-k","title":"Dell'Orto Needle for PHBE\/PHF\/PHM\/PHSB\/VHSB K Type","description":"\u003cp\u003e\u003cstrong\u003eK type needle for Dell'Orto Carburetors PHBE\/PHF\/PHM\/PHSB\/VHSB \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePartial load or half gas can be reached when the gas slide valve is 1\/4 to 3\/4 open. Jet needles and mix tube are responsible for regulating the gas in this range. Needles The needle can be adjusted with a clip in 4 different positions. If the motor runs fine with the throttle completely wide open, but stutters at half, then it's running too rich. You can hang the jet needle lower (move the clip higher up the needle) and so reduce the mix in this range. If the needle is already at it's lowest position and the mix is still too rich, then use either a thicker needle or a smaller mix tube. If your performance is too low at full gas then hang the needle higher. Needles come in a variety of thicknesses, lengths and grades. We recommend trying out several needle sizes to find which one is best for your personal tuning needs.\u003c\/p\u003e","brand":"Scooterwest","offers":[{"title":"K12","offer_id":52435494797601,"sku":"NEED-K12","price":14.95,"currency_code":"USD","in_stock":true},{"title":"K24","offer_id":52435494830369,"sku":"NEED-K24","price":14.95,"currency_code":"USD","in_stock":true},{"title":"K32","offer_id":52435494863137,"sku":"NEED-K32","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/4817\/1809\/files\/need-k-dellorto-needle-for-phbephfphmphsbvhsb-k-type_10.jpg?v=1781816789"},{"product_id":"malossi-dellorto-carburetor-phbh-30mm","title":"MALOSSI DELLORTO PHBH 30MM CARBURETOR","description":"\u003cp\u003e\u003cstrong\u003eMALOSSI DELLORTO CARBURETOR PHBH 30MM\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDoes NOT included maniflods or cables. \u003c\/p\u003e","brand":"Scooterwest","offers":[{"title":"Default Title","offer_id":52435957481761,"sku":"M725658","price":249.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0950\/4817\/1809\/files\/carburettor-malossi-phbh-30mm-m725658.jpg?v=1781816975"}],"url":"https:\/\/scooterwest.com\/collections\/genuine-performance-carb-intake.oembed","provider":"Scooterwest","version":"1.0","type":"link"}