MALOSSI 183cc CYLINDER KIT 63MM iGET VESPA PRIMAVERA SPRINT LIBERTY 3V (FORCE MASTER NOT INCLUDED)

MALOSSI 183cc CYLINDER KIT 63MM iGET FOR VESPA PRIMAVERA, SPRINT, LIBERTY 3V (FORCE MASTER NOT INCLUDED)

This is for the cylinder kit ONLY, Force Master 2 or o2 Controller are required, but NOT included, see related items.

Malossi 183cc (63mm Bore) Cylinder Kit for the Vespa Primavera and Sprint 150cc 3-valve motor.

This cylinder kit will work on all years of Primavera and Sprint 150cc, All Years 946 and 2013-2019 Fly 150. In addition to the kit, you will need the correct Force Master (see list below).

Increase the engine size (displacement) of your Vespa Sprint or Primavera 150 3V from a 150cc to a 183cc (over 20%). You know what they always say about tuning 4-stroke engines: "There is no replacement for displacement." You can expect significantly increased torque, better acceleration and top speed, and faster riding up hills and with a passenger.

Kit includes cylinder, piston, rings, wrist pin/clips, gaskets, and installation instructions (all pictured is included in kit).

HIGHLY RECOMMEND GETTING THE CONSUMABLES KIT ALSO. SEE RELATED ITEMS BELOW.

Fits Piaggio & Vespa 150 3V Models:

USA Market:

-VESPA Sprint 3V 150 ie 2015-2023

-VESPA Primavera 3V 150 ie 2015-2023

-VESPA Sprint 3V 150 ie 2024-

-VESPA Primavera 3V 150 ie 2024-

-VESPA 946 150cc 2013-

-Piaggio Liberty 150cc 2017-2024

-Piaggio Fly 150cc 2013-2019

DOES NOT INCLUDE FORCE MASTER ECU:

To be installed exclusively with Force Master 2 control unit M5516549

Non iGet Primavera & Sprint 150cc 2014-2016

To be installed exclusively with Force Master 2.1 control unit M5519933

iGet Liberty 2017-2024, Sprint and Primavera 150cc 2017-2023

To be installed exclusively with Force Master 2 control unit M5516670B

Vespa 946 125-150cc (all years) & Fly 150cc 2013-2019 with MIU ECU, These models are identified by having an integrated Magneti Marelli MIU 3 Throttle Body & ECU

To be installed exclusively with Force Master 2.1 control unit M5519025

EURO 5 2024- Sprint and Primavera 150cc

You can also use the Malossi O2 controller (4-wire M5514749) for the Primavera Sprint iGET 2017-2023.

Scooter West has been a proud distributor of Malossi products since 1995. We

keep more Malossi part numbers in stock than any other company in North America.

When it comes to quality performance scooter parts, MALOSSI is the long-standing

industry leader for price, selection, and quality. All Malossi components are

made 100% in Italy. All final manufacturing, assembly, and research and

development is done at their impressive facility in Bologna, Italy. Literally,

just down the street from Ducati and a 20 minute drive from Ferrari. The quality

of Malossi components is commonly far superior to comparable original equipment

components. They are after-all, designed and race-track tested and approved.

Like many other Italian aftermarket companies, Malossi has humble beginnings as

a small family business sprung from one man's passion. Mr. Ugo Malossi started

tuning and manufacturing the best performance carburetors in the region under

the tutelage of his mechanically accomplished father, Armando. In 1957, with the

vision of Ugo, Malossi was formally born. Ugo's son and daughter are the active

managers of the company and they share in their father's passion and vision to

“Always improve.” Ride with the Best. Ride Malossi

**Disclaimer** No Refunds, Exchanges, or Returns on performance items.

Certain performance items may void your factory warranty. Additionally, some

performance items may not be suitable for on-road use. Scooter West is not

responsible for any damages caused by the correct or incorrect installation

and/or misuse of any performance products. With all this standard legal jargon

being said, we wouldn't sell anything that we wouldn't install on our own

scooters. We are blessed to have a Robot running our service department that

makes sure everything is installed correctly on our personal scooters ;).