Crankshaft Seal 52-58 Vespa, 55-58 Allstate

Crankshaft Seal for 1952-1958 Vespa models and 1955-58 Allstate Models

Crank seal for 1952-1958 Vespa models and 1955-1958 Allstate models, also known as the "small ridge" style of metal seal. This seal is on both sides of the crankshaft on the listed scooters so you would need two. You can use an 084644 if you hammer down the ridge.

Inner Diameter – 20mm
Outer Diameter (Rubber) - 40mm
Outer Diameter (Metal) - 60mm
Thickness – 6mm

Alternate original part numbers for this part:
019616
3/25180

See the related items below for similar seals needed and seal sets.

This seal fits:

-Vespa 125 (1952-1953) - VM1
-Vespa 125 (1953-1954) – VM2
-Vespa 125 (1954-1955) - VN1
-Vespa 125 (1956-1957) – VN2

-Vespa 150 (1954-1955) - VL1
-Vespa 150 (1955-1956) – VL2
-Vespa 150 (1956-1957) - VL3
-Vespa GS150 (1955) – VS1
-Vespa GS150 (1956) – VS2
-Vespa GS150 (1957) – VS3
-Vespa GS150 (1958) – VS4
-Vespa GS150 (1958-1961) – VS5
-Vespa VB1 150 (1957-1958) – VB1

-Allstate 788.94490 (1955)
-Allstate 788.94491 (1956)
-Allstate 788.94492 (1957)
-Allstate 788.94493 (1958)

Here at Scooterwest, we strive to bring you the highest quality seals available. Our seals are often Corteco or Rolf brand when available, if not they are the highest quality seals we can get our hands on. We take quality seriously because we believe that Vespas should have their integrity preserved with quality parts.

TECH TIP – We put a very thin layer of grease on the outer and inner lips of the seals to help install them safely and to help make a good seal. Remember to remove any woodruff keys prior to installation.